Screen · Version 3
OK to Send It
StandbyWarmingSend it
The main gauge screen: a status pill that goes STANDBY, WARMING, then SEND IT as the engine warms. Free download.
Not yet seen in a carFree
bTres S1 / S2 · free screens and guides
Free screens for the bTres
Free gauge screens and guides for the bTres display (S1/S2) in a 4.0T Audi S6, S7 or RS7 (the car must be tuned with a DS1; some screens read DS1 data).
Start here
Screens and guides
Screen · beta
DL501 adaptation helper
Shows when the gearbox is warm and ready for the VCDS clutch adaptation.
It needs the DS1 plugged in, and it stops when you swap to VCDS (Ross-Tech's diagnostic software). It has been loaded on one car but never used for a real adaptation.
Beta, untestedFree
Guide
How to add screens to the bTres S1/S2
Put a screen file on the unit over its Wi-Fi, keep your own screens in order, and undo it if you need to.
Guide
Build a bTres screen
Make your own screen from an empty file, then see how two real screens are put together.
What is a bTres screen?
A bTres screen is one small JSON file that describes what the display draws. You upload it to the bTres over its own Wi-Fi, with no app or cable. It shows live data from the DS1 (Dyno Spectrum's data-logging tuning module), such as boost, oil and water temperature, gear and knock, in the layout and colors the file describes.
Free and shared
Load Logic Tuning gave permission to build on their screen on the condition that nobody profits, so everything here stays free.
- Better Than, Inc., maker of the bTres (not affiliated with this site)
- The bTres owners group on Facebook, for ideas and bug reports
Report a bug in the owners group with your car, firmware, setting and a photo.
Use at your own risk: everything here is free, with no warranty, and nothing has been tested in a car yet. A screen only displays data the bTres already receives. It is not a safety device and does not replace the car's own warnings or your judgment.